ADVOCATES FOR CONDITION BASED PREVENTIVE MAINTENANCE

We'll show you how to convert to CBM and what you'll gain.

THREE SOLUTION SCENARIOS; FLEET: Safely extending oil drain intervals by installing a $900 engine retrofit alternative to media filtration and a lubricant upgrade. Could it be that easy? Conway trucking proved it. Their over-the road trucks are retrofitted with the Spinner II Centrifuge and high grade oil. GENSETS: Your diesel power generator could last 50% longer between overhauls or longer. The benefits outweigh the front end investment. Primrose Oil Co. ran a test engine 50,000 hours, more than three times the Caterpillar PM overhaul interval. The protocol called for the installation of a Spinner II Centrifuge, one time fill with synthetic oil and periodic additive refreshment. Click here to download the literature sheet. The Alaska Dept. of Transportation, equipped new Cummins Gensets with the Spinner II Centrifuge and higher quality oil. Download and read the report below.   "This year, the standby units are still below the 20,000-hour mark and mains are 40,000 to 45,000 hours. With centrifuges now on six units and the oil analysis showing excellent results, we have eliminated lube oil filters. A cleanable strainer takes its place and thus far eliminated oil changes. Make-up oil is all that is used. To date I do not know at what hour we will have to change oil." Download the reprint here. FLUID POWER: Your fluid power systems (hydraulics) could be free of sub-micron sized particle intrusion which destroys power unit bearings and rod seals. A Spinner II Centrifuge separates sub-micron size particulate to 0.1 µm.   You can minimize unscheduled downtime and catastrophic failures while easing the cost load of preventive maintenance. NORIA and Machinery Lubrication Magazine agree.  Watch  this video. http://machinerylubrication.com/View/2098/hydraulic-fluid-contamination